manualshive.com logo in svg

ProSoft Technology RLXIC-SG, User Manual, Page: 52 / 136

Share
Download
ProSoft Technology RLXIC-SG User Manual Download Page 52

RLXIC-SG 

♦

 Intelligent Cellular 

Data Communication and Host Modes 

RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM  

User Manual 

 

 
Page 52 of 136  

ProSoft Technology, Inc. 

May 29, 2009 

 

 

7.1.2 Serial 

Modes 

ƒ

 

PPP Mode

: The RLXIC-SG uses PPP to communicate with a device or 

computer connected to the serial or USB port. 

ƒ

 

SLIP Mode

: The RLXIC-SG uses SLIP to communicate with a device or 

computer connected to the serial or USB port. 

ƒ

 

UDP 

and

 UDP PAD

: Any data received on the serial port is assembled into 

UDP packets, and sent to the session's associated IP address and Port 
(described later). Any responses received from the associated IP address 
and port destined for the Device Port are unwrapped, and sent out the serial 
port. 

ƒ

 

TCP

 and

 TCP PAD

: Any data received on the serial port is packaged into 

TCP messages, and sent to the associated connection's IP address and Port 
(described later). Any data received from the TCP peer is unwrapped and 
sent out the serial. 

7.1.3 Data 

Communication 

ƒ

 

Public and Private Modes

: The method used by the RLXIC-SG to pass an 

IP address to a connected device. 

ƒ

 

Keepalive

: How the RLXIC-SG maintains its connection to the cellular 

network. 

7.2 Basic 

Modes 

7.2.1 Start 

up 

Mode 

The serial port of the RLXIC-SG can be configured to enter any of the modes 
automatically on power up (in most cases, this is also after it has registered on 
the cellular network). This is done by setting the Startup Mode Default to the 
desired mode. If this setting is non-zero, the modem will enter the specified mode 
after 5 seconds. If you want to cancel this behavior, the ATMD0 command can 
be used before the 5-second time-out expires. 

You can configure the Startup Mode in AceManager at part of the 

UDP

 

group. 

 

Summary of Contents for RLXIC-SG









































































































































Reviews:

No comments