manualshive.com logo in svg

ProSoft Technology RLXIC-SG, User Manual, Page: 109 / 136

Share
Download
ProSoft Technology RLXIC-SG User Manual Download Page 109

Configuration Commands 

RLXIC-SG 

♦

 Intelligent Cellular 

User Manual 

RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM 

 

 
ProSoft Technology, Inc. 

Page 109 of 136 

May 29, 2009 
 

11.3.7 PPP/Ethernet 

This group includes commands specific to PPP (serial) or Ethernet connections 
between the RLXIC-SG and a connected device. 

 

*DHCPSERVER=n 

Act as a DHCP server for any Ethernet device connecting to the RLXIC-SG. 
DHCP (Dynamic Host Configuration Protocol) allows one device, the DHCP 
server, to provide dynamic IP addresses to any other device which requests 
them. 

ƒ

 

n=0 

: Disabled. The RLXIC-SG will not send out replies to DHCP requests. 

ƒ

 

n=0

 : Disabled (cannot be configured in AceManager). 

ƒ

 

n=0 

: Disables the DHCP server. 

ƒ

 

n=1

 : Enabled. The modem will act as the primary DHCP server for the 

network. 

ƒ

 

n=2

 : Enabled if no other DHCP server is detected (default). If another DHCP 

server is detected on the network, the RLXIC-SG will not send out replies to 
DHCP requests. 

ƒ

 

n=0

 : Disabled. The RLXIC-SG will not send out replies to DHCP requests. 

*HOSTAUTH=n 

Host Authentication Mode: Use PAP or CHAP to request the user login and 
password during PPP or CHAP negotiation on the host connection. The 
username and password set in *HOSTUID and *HOSTPW will be used. 

ƒ

 

n=0 

: Disable PAP or CHAP request (Default). 

ƒ

 

n=1

 : PAP and CHAP. 

ƒ

 

n=2

 : CHAP 

Summary of Contents for RLXIC-SG









































































































































Reviews:

No comments