manualshive.com logo in svg

ProSoft Technology RLXIC-SG, User Manual, Page: 114 / 136

Share
Download
ProSoft Technology RLXIC-SG User Manual Download Page 114

RLXIC-SG 

♦

 Intelligent Cellular 

Configuration Commands 

RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM  

User Manual 

 

 
Page 114 of 136  

ProSoft Technology, Inc. 

May 29, 2009 

 

11.3.10 Other 

 

DAE=n 

AT Escape Sequence detection. 

ƒ

 

n=0

 : Enable 

ƒ

 

n=1

 : Disable 

*DATZ=n 

Enables or disables reset on ATZ. 

ƒ

 

n=0

 : Normal Reset (Default). 

ƒ

 

n=1

 : Disable Reset on ATZ. 

*IPPING=n 

Set the period to ping (if no valid packets have been received) a specified 
address (*IPPINGADDR) to keep the modem alive (online). 

ƒ

 

n=0

 : Disable pinging (default) 

ƒ

 

n=15-255

 minutes 

Note:

 15 minutes is the minimum interval which can be set for Keepalive. If you set *IPPING for a 

value between 0 and 15, the minimum value of 15 will be set. 

*IPPINGADDR=[d.d.d.d][name] 

Set the IP address or valid internet domain name for the RLXIC-SG to ping to 
keep itself alive (online). *IPPING must to be set to a value other than 0 to enable 
pinging. 

ƒ

 

d.d.d.d=IP address

 

ƒ

 

name=domain name

 

Summary of Contents for RLXIC-SG









































































































































Reviews:

No comments