RLXIC-EH
♦
Intelligent Cellular
Configuration Commands
RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
User Manual
Page 92 of 111
ProSoft Technology, Inc.
May 29, 2009
*MSCIUPDPERIOD=n
Modem Status Update Period - where n defines the update period in seconds.
n=0
: Disabled.
n=1-255
seconds
*TPORT=n
Sets or queries the port used for the AT Telnet server. If 0 is specified, the AT
Telnet server will be disabled. The default value is 2332.
n=0
: Disabled.
n=1-65535
Tip:
Many networks have the ports below 1024 blocked. It is recommended to use a higher
numbered port.
*TELNETTIMEOUT=n
Telnet port inactivity time out. By default, this value is set to close the AT telnet
connection if no data is received for 2 minutes.
n=minutes
DAE=n
AT Escape Sequence detection.
n=0
: Enable
n=1
: Disable
*DATZ=n
Enables or disables reset on ATZ.
n=0
: Normal Reset (Default).
n=1
: Disable Reset on ATZ.
*SNTP=n
Enables daily SNTP update of the system time.
n=0
: Off
n=1
: On
*SNTPADDR=[d.d.d.d][name]
SNTP Server IP address, or fully-qualified domain name, to use if *SNTP=1. If
blank, time.nist.gov is used.
d.d.d.d=IP address
name=domain name
Summary of Contents for RLXIC-EH
Page 4: ......
