Hardware Installation of the RLXIC-EH
RLXIC-EH
♦
Intelligent Cellular
User Manual
RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
ProSoft Technology, Inc.
Page 21 of 111
May 29, 2009
4
Hardware Installation of the RLXIC-EH
In This Chapter
Connecting to Power ............................................................................. 22
Connecting to a Computer or other Device ........................................... 23
Indicator Lights ...................................................................................... 23
Connecting Antennas ............................................................................ 26
Note:
During installation, please be sure that the cables are secure but do not bear any additional
weight that could loosen the connector from the unit.
Your RLXIC-EH should be mounted in a position that allows easy access for the
cables so they are not bent, constricted, in close proximity to high amperage, or
exposed to extreme temperatures. The LEDs on the front panel should be visible
for ease of operational verification. You should ensure that there is adequate
airflow around the modem but that it is kept free from direct exposure to the
elements, such as sun, rain, dust, etc.
Caution:
The RLXIC-EH is in a hardened case, and designed for use in industrial and extreme
environments. However, unless you are using cables expressly designed for such environments,
they can fail if exposed to the same conditions the RLXIC-EH can withstand.
Note:
This device is not intended for use within close proximity of the human body. Antenna
installation should provide for at least a 20 CM separation from the operator.
Antennas selected should not exceed a maximum gain of 5 dBi under standard
installation configuration. In more complex installations (such as those requiring
long lengths of cable, and/or multiple connections), it is imperative that the
installer follow maximum dBi gain guidelines in accordance with the radio
communications regulations of the Federal Communications Commission (FCC),
Industry Canada, or your country's regulatory body (if used outside the US).
Summary of Contents for RLXIC-EH
Page 4: ......
