Configuration Commands
RLXIC-EH
♦
Intelligent Cellular
User Manual
RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
ProSoft Technology, Inc.
Page 81 of 111
May 29, 2009
d.d.d.d=
IP address or domain name
ppppp=
the port address
Examples:
ATS53=T192.168.100.23/12345
ATS53=foo.earlink.com
Telnet to the specified IP at port 12345.
ATS53=192.168.100.23/12345
Query the specified IP at port 12345.
ATS53=/12345
Query port 12345.
Enable Event Reporting = n
Enable or disable Event Reporting, by selecting either 1-Turn on ER or 0-Turn off
ER. If you choose to enable, click on Write, and then Refresh all to see all the ER
fields.
n=0
: Disables
n=1
: Enables
+++
Note:
+++ is not proceeded by AT nor does it require a carriage return (enter). There must be an
idle time (set by S50) on the serial port before and after this command.
AT Escape sequence. If the RLXIC-EH is in a data mode (any mode other than
PassThru), this command causes the modem to re-enter AT command mode.
The "+" is ASCII 0x2B.
+++ is not available in AceManager.
Tip:
DAE=1 disables the +++ command.
A/
Note:
A/ is not proceeded by AT.
Re-execute last command.
A/ is not used in AceManager
.
A
Manually answer an incoming connection.
A is not used in AceManager
.
D[method][d.d.d.d][/ppppp] or D[method][@name][/ppppp]
Dial a connection to a remote IP and Port using method. Cannot be configured in
AceManager.
method=P
: Establish a UDP connection
method=T
: Establish a TCP connection
Summary of Contents for RLXIC-EH
Page 4: ......
