RLXIC-EH
♦
Intelligent Cellular
Activating RLXIC-EH on your cellular provider
RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
User Manual
Page 20 of 111
ProSoft Technology, Inc.
May 29, 2009
3.2.2 Connect to the Modem
1
Click the
C
ONNECT
button.
2
Select
TCP
,
UDP
, or
PPP
.
Enter the connection information.
o
For UDP or TCP, enter
192.168.13.31
as the IP address.
o
For PPP, select the COM port to which the modem is connected.
Note:
The simplest way to connect to the modem is through a USB cable. Refer to Universal Serial
Bus (USB) (page 37) for information on how to install the necessary drivers for a USB connection.
3
Enter the password. The default password will be entered for you.
4
Click
OK.
3.2.3 Enter
the
APN
1
Select
CELLULAR
from the menu on the left side of AceManager (under
"Groups")
2
Type your APN in the New Value field of
*NETAPN
.
Optional:
If you need to configure your modem for a custom APN, after entering the APN, there is
additional information you will need to enter.
a
Select
Misc
from the menu on the left side under the Common group.
b
Enter the NAI into the new value field for *NETUID and enter your network
password into the new value field for *NETPW.
3.2.4 Write the Settings to the RLXIC-EH
1
Click the
W
RITE
button on the tool bar of AceManager.
2
Wait for the message "Write Successful" to appear in the status bar.
3
Reset the RLXIC-EH.
Summary of Contents for RLXIC-EH
Page 4: ......
