Configuration Commands
RLXIC-EH
♦
Intelligent Cellular
User Manual
RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
ProSoft Technology, Inc.
Page 89 of 111
May 29, 2009
10.3.5 SMTP
SMTP (Simple Mail Transfer Protocol) is the de facto standard for email
transmission across the Internet. The RLXIC-EH can send messages using
SMTP if it has been configured to use a mail server.
Note:
You cannot send an Email with your RLXIC-EH unless the Email server you have configured
allows your RLXIC-EH as a relay host. Talk to your network administrator to ensure you can send
email through the email server using your RLXIC-EH.
SMS (Short Message Service) is another way to send messages via the cellular
network. Most SMS commands require the modem to be in PassThru mode.
Note:
SMS may not be supported by your account with your cellular carrier.
*SMTPADDR=[d.d.d.d][name]
Specify the IP address or Fully Qualified Domain Name (FQDN) of the SMTP
server to use.
d.d.d.d=IP Address
name=domain name
(maximum: 40 characters).
*SMTPFROM=email
Sets the email address from which the SMTP message is being sent.
email=email address
(maximum: 30 characters).
*SMTPUSER=user
The email account username to authenticate with the SMTP server
(*SMTPADDR) for sending email.
user=username
(maximum: 40 characters).
Note:
Not required to use SMTP settings but may be required by your cellular carrier.
*SMTPPW=pw
Sets the password to use when authenticating the email account (*SMTPFROM)
with the server (*SMTPADDR).
pw= password
Summary of Contents for RLXIC-EH
Page 4: ......
