Configuration Commands
RLXIC-EH
♦
Intelligent Cellular
User Manual
RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
ProSoft Technology, Inc.
Page 87 of 111
May 29, 2009
10.3.4 PPP/Ethernet
This group includes commands specific to PPP (serial) or Ethernet connections
between the RLXIC-EH and a connected device.
*HOSTPRIVMODE=n
Set or query whether a private or public (network) IP is to be used when the Host
initiates a 1x connection to the modem.
n=0
: Public (network) IP Mode: When the Host initiates a PPP connection,
the host will be given the network IP address that was obtained from the
cellular carrier while registering on the network. If the network issues a new
IP address, the cellular connection will be closed (because the IP address
has changed) and has to be re-initiated. (default).
n=1
: Private IP Mode: When the Host initiates a 1x connection, the host will
be given the IP address specified in *HOSTPRIVIP. The modem will then
perform 1 to 1 NAT-like address translation, which shields the Host from
network IP changes.
*HOSTPRIVIP=d.d.d.d
Set or query the private IP address that is to be negotiated by the 1x connection
if *HOSTPRIVMODE =1.
d.d.d.d=IP Address
*HOSTPEERIP=d.d.d.d
Set or query the IP address that can be used to directly contact the RLXIC-EH
after a cellular connection is established. If this value is not specified,
192.168.13.31 will be used.
d.d.d.d=local or peer IP address
of the modem.
Summary of Contents for RLXIC-EH
Page 4: ......
