ProSoft Technology PLX51-DF1-ENI User Manual Download Page 83

Page: 83 / 87

Support, Service & Warranty

Page 83 of 87

SUPPORT, SERVICE &

WARRANTY

8.1.

CONTACTING TECHNICAL SUPPORT

ProSoft Technology, Inc. is committed to providing the most efficient and effective support
possible. Before calling, please gather the following information to assist in expediting this
process:

Product Version Number

System architecture

Network details

If the issue is hardware related, we will also need information regarding:

Module configuration and associated ladder files, if any.

Module operation and any unusual behavior

Configuration/Debug status information

LED patterns

Details about the serial, Ethernet or Fieldbus devices interfaced to the module, if any.

Note: For technical support calls within the United States, ProSoft’s 24/7 after

-hours phone support is available

for urgent plant-down issues. Detailed contact information for all our worldwide locations is available on the

following page.

Summary of Contents for PLX51-DF1-ENI
























































































Search results

Summary of Contents for PLX51-DF1-ENI

Reviews:

Brands by name

Popular brands

ProSoft Technology PLX51-DF1-ENI, User Manual

Search results

Summary of Contents for PLX51-DF1-ENI

Reviews:

Brands by name

Popular brands