manualshive.com logo in svg

ProSoft Technology inRax MVI69-PDPMV1, User Manual

Share
Download
ProSoft Technology inRax MVI69-PDPMV1 User Manual Download Page 82

Mailbox Messaging 

MVI69-PDPMV1 

♦

 CompactLogix or MicroLogix Platform 

User Manual 

PROFIBUS DPV1 Master 

 

 

Page 82 of 225 

ProSoft Technology, Inc. 

 

July 8, 2011 

 

4.1 

Mailbox Message Queuing 

The MVI69-PDPMV1 module operates asynchronously on the Mailbox Messages 
and as such provides for the queuing of the messages as they are received. The 
queue sizes used in the module are as follows: 

 

Queue Type 

Queue Size 
Max 

Description 

Output message from processor 

126 

Number of messages that the MVI69 module 
will queue by type of message. Note that status 
of the queues can be monitored via the Queue 
Message Count values. 

Input messages for processor 

126 

Alarm messages from slaves for 
processor 

100 

 

 

4.1.1 Queue 

Timeouts 

The MVI69-PDPMV1 module will only allow a message to stay in a queue for up 
to 10 seconds. If the PROFIBUS Master (for output messages) or the processor 
(for input and alarm messages) has not successfully received a message within 
10 seconds, the module will clear the message out of the queue. 

 

Summary of Contents for inRax MVI69-PDPMV1


































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands