MVI69-PDPMV1
♦
CompactLogix or MicroLogix Platform
Module Setup
PROFIBUS DPV1 Master
User Manual
ProSoft Technology, Inc.
Page 63 of 225
July 8, 2011
Cancel and Help
If the
C
ANCEL
button is pressed a message similar to the one below will appear.
If the
H
ELP
button is pressed the online help will start.
Scanning for Slaves Manually
In this part of the procedure, you will add and configure the PROFIBUS slaves. In
the following steps, you will add and configure a ProLinx PROFIBUS slave
module. The configuration information (.GSD file) for this module is provided on
the inRAx Solutions CD-ROM.
1
In
ProSoft Configuration Builder for PROFIBUS
, click the plus sign
[+]
to
expand the
PROFIBUS DP
tree.
2
Navigate to the folder containing the type of slave device to add, and then
click the plus sign
[+]
to expand the folder.
3
Drag the slave icon into the
Bus Configuration
window. The slave device
appears in the
Bus Configuration
window as a network location to the Master.
