Module Setup
MVI69-PDPMV1
♦
CompactLogix or MicroLogix Platform
User Manual
PROFIBUS DPV1 Master
Page 74 of 225
ProSoft Technology, Inc.
July 8, 2011
To use the CIPconnect Path Editor
1
Click
CIP
P
ATH
E
DIT
to open the
CIPconnect Path Editor
dialog box.
Parameter Description
Source Module
Source module type
Source Module IP Address
IP address of the source module
Source Module Node Address
ControlNet Node address of the source module
Note:
Not currently used by MVI69 modules
Destination Module
Select the destination module associated to the source module
in the rack. The connection between the source and destination
modules is performed through the backplane.
Destination Module Slot Number
The slot number where the destination module is located
2
Click
C
ONSTRUCT
CIP
P
ATH
to build the path in text format
3
Click
OK
to confirm the configured path.
The following example should provide a better understanding on how to set up
the path for your network.
