PRONAR ZEFIR 85, Servicing Instruction

Page: 27 / 88

PRONAR
D. CONTROL AND CHECK ELEMENTS
PRONAR
17
MULTI-FUNCTION SWITCHES
1
A
B
Fig. D-5 Switch at the steering column.
1 – multi-function switch of lights and horn (sound signal)
Multi-function switch of lights and horn (fig.D-5;pos.1) functions as follows:
- by turning the handwheel (A) to the position it is achieved switching-on of parking lights;
- by turning the handwheel (A) to the position it is achieved switching-on of traffic beam;
- by turning the handwheel (B) forward it is achieved switching-on of the right direction indicator;
- by shifting the handwheel (B) backward it is achieved switching-on of the left direction indicator;
- by pressing the handwheel (B) in place indicated by it is achieved horn (sound signal).
IGNITION SWITCH
1
Fig. D-6 Controlling of engine start-up. 1 – starter switch;
On the control board (
fig. D-6 ), on the right side, there is the starter switch „ignition switch” having
three positions:
0 – switched out STOP (you may take out the key); 1 – switching-on of control devices; 2 – switching-on of
the starter
We switch on the starter by turning the key (with simultaneous pressing it) from position 1 to position
2 . After starting the engine, the key returns automatically from the position 2 to the position 1 .
Sound signalling so called “buzzer” functions in position 1 of the ignition switch.
You need not leave the ignition switch in position 1 for a long time because it may cause
damage of panel of indicators (overheating the excitation circuit resistor of the
alternator).