PRONAR
D. CONTROL AND CHECK ELEMENTS
PRONAR
22
INTERLOCKING OF DIFFERENTIAL GEAR
Do not switch on interlocking of differential gear at velocities over 10 km/h and on turns
– it can impede driving the tractor.
WYŁ
WŁ
Fig. D-16
Controlling the interlocking of differential
gear of the rear axle assembly (the pedal of interlock
is located in the cab floor)
The pedal of interlocking of differential gear (fig. D-16)–
possesses two positions:
1 (upper position)
– interlocking switched off – the tractor can move during transportation on hardened
roads and in field conditions on base ground (soil) with good adhesion.
2 (lower position)
– interlocking switched on - you must use during performance of field or transport works
in situation when drive wheels skid and it threatens getting stuck of the tractor.
ATTENTION ! It is allowed to switch on the interlock of differential gear at field and transport works
during increased skid.
SWITCHING ON OF THE INTERLOCKING OF DIFFERENTIAL GEAR AT TRANSPORT
WORKS ON HARDENED PAVEMENT AND AT TURNING OF FRONT WHEELS OVER
18
°°°°
IS FORBIDDEN
Non compliance with above mentioned rules shortens the period of failure-free
operation of driving system and impedes driving the tractor. Use the switched-on
interlocking for a short time – in order to overcome road obstacles.
Summary of Contents for ZEFIR 85
