PRONAR T286, Operator'S Manual

Page: 108 / 168

SECTION 4 Pronar T286
4.34
Fold the rear bumper
Press and hold the push-button for folding
the rear fender. If the fender is completely
folded, indicator light (4) will light up on the
control panel - figure (4.7).
If the fender is not completely folded, the
tipping function does not work.
Open the rear wall of the load box and protect it against closing. During
opening, exercise particular caution because the load may exert great
pressure on the wall. If the load box is equipped with the rear hydraulic wall,
use the control panel.
Press and hold the push-button (17) or (18) - figure (4.7) until the load
box wall is completely opened.
IMPORTANT!
Symbols in the form of arrows (17), (18) - figure
(4.7)
located on the control panel do not
define rising or lowering direction (it depends on the load box connection method).
If needed, unlock the load box
(if the load box position
should be changed).
Press and hold the push-button for
withdrawing the load box interlock. Indicator
light (15) must light up - figure (4.7). When
indicator light lights up, keep the push-button
pressed for 1-2 seconds.