PRONAR PUV-3600HD, Operator'S Manual

Page: 11 / 83

SECTION 1 PUV-3600HD / PUV-4000HD
1.3
TIP
In the event of ordering a replacement part or in the case of the appearance of problems
it is very often necessary to give the factory numbers of the plough, therefore it is
recommended that these numbers are inscribed in the spaces below (see
INTRODUCTION).
1.2 PROPER USE
PUV-3600HD/PUV-4000HD snow plough is designed for clearing road surfaces, squares,
parking spaces and all other hard road and footpath surfaces such as asphalt, concrete
paving blocks, paving, concrete. Using the machine for other purposes should be regarded
as improper. Depending on the equipment, the snow plough can be mounted on agricultural
tractors, front loaders and other slow-moving vehicles that meet the requirements set out in
Table 1.1
Using it as intended also involves all actions connected with the safe and proper operation
and maintenance of the machine. Due to the above, the user is obliged to:
•
carefully read the OPERATOR'S MANUAL and comply with its recommendations,
•
understand the machine's operating principle and how to operate it safely and
correctly,
•
comply with general safety regulations while working,
•
prevent accidents,
•
comply with road traffic regulations.
The machine may only be used by persons, who:
•
are familiar with the contents of this publication and with the contents of the carrying
vehicle Operator's Manual
•
have been trained in machine operation and safe working conditions,
•
have the required authorisation to drive and are familiar with the road traffic
regulations and transport regulations.