PRONAR PUV-3600HD, Operator'S Manual

Page: 30 / 83

PUV-3600HD / PUV-4000HD SECTION 3
3.2
3.1 TECHNICAL SPECIFICATION
TABLE 3.1 BASIC TECHNICAL DATA
Snowplough model
Unit
PUV-3600HD PUV-4000HD
Mounting method:
- three point linkage
- front loader
- other -
-
- cat. II according to ISO 730-1
EURO mount, ŁC-1650
according to the Manufacturer's offer
Working width (FIGURE 3.1)*
L, P - snow clearing to the left, to the
right
S- symmetrically to the left/right
SO- symmetrically to the left/right
(mouldboards directed forwards)
mm
mm
mm
3,022
3,115
2,955 3,280
3,420
3,140
Working angle of mouldboards
o
+ 35
o
/ - 35
o
Total height mm 1,230 1,260
Mouldboard maximum height mm 1,164 1,206
Length (for S working position)
mm 1,323 1,475
Control - hydraulic using solenoid
Supply -
external hydraulic system and electrical system of
the carrying vehicle (12V or 24V) (depending on the
snow plough version)
Type of collecting blades
(depending on the snow plough
version)
-
- rubber blades (set at the angle of 90
o
to the
ground)
- steel blades (set at the angle of 60
o
or 90
o
to the
ground)
- steel blades 600HB (set at the angle of 60
o
to the
ground)
- perforated steel blades (set at the angle of 60
o
or
90
o
to the ground)
Weight ** kg 1,025 1,270
Power demand hp 110 ÷ 220 120 ÷ 250
Maximum working speed km/h 10 / 6 (for front loaders)
Other information - single person operation
* – PUV-3600HD with metal collecting blades with bent fenders. PUV-4000HD with straight fenders.
**– for the machine without additional equipment, with category II linkage and steel collecting blades
Level of noise emitted by machine does not exceed 70 dB(A)