PRONAR PUV-3600HD, Operator'S Manual

Page: 72 / 83

PUV-3600HD / PUV-4000HD SECTION 5
5.14
TIP
Bolt and nut connections of fenders should be tightened using the tightening torque of
240 Nm.
5.3 SLIDE REPLACEMENT
DANGER
Replacement of slides should be performed only when the carrying vehicle's engine is
stopped, and the machine is raised and secured.
FIGURE 5.12 Slide replacement
(1) - slide; (2) - slider; (3) - pin, (4) - bolt; (5) - nut; (6) - washer
Excessively worn or damaged slide elements must be replaced with new ones (FIGURE
5.12). In order to do this, raise the snow plough and support it with sufficiently stable and
strong supports. If the snow plough is hitched and raised on the front three-point linkage,
protect it from falling and immobilise the carrying vehicle (turn off the engine and engage the
parking brake). Undo nut (5), remove bolt (4) fixing slide (1) with slider (2). Check slide (1)