PRONAR PUV-3600HD, Operator'S Manual

Page: 80 / 83

PUV-3600HD / PUV-4000HD SECTION 5
5.22
The switch with the solenoid valve power lead and the connecting cable of clearance lights
should be disconnected from the machine and protected against adverse weather conditions.
5.9 TIGHTENING TORQUE FOR NUT AND BOLT
CONNECTIONS
ATTENTION
Should it be necessary to change individual parts, use only original parts or those
indicated by the Manufacturer. Non-adherence to these requirements may put the user
and other people's health and life at risk, and also cause damage to the machine.
TABLE 5.18
TIGHTENING TORQUE FOR NUT AND BOLT CONNECTIONS
5.8 8.8 10.9 THREAD
DIAMETER
[mm]
TIGHTENING TORQUE [Nm]
M6 8 10 15
M8 18 25 36
M10 37 49 72
M12 64 85 125
M14 100 135 200
M16 160 210 310
M20 300 425 610
M24 530 730 1 050
M27 820 1 150 1 650
During maintenance and repairs use appropriate torque for bolt connections (unless other is
specified for a particular connection). Recommended tightening torque values apply to non-
greased steel bolts TABLE 5.18