PRONAR PUV-3600HD, Operator'S Manual

Page: 21 / 83

SECTION 2 PUV-3600HD / PUV-4000HD
2.3
machine is not compatible with the category of the carrying vehicle's linkage
system.
•
After completion of hitching the machine, check the safeguards. Carefully read
the carrying vehicle Operator's Manual.
•
To hitch the machine to the carrying vehicle use only linking elements
recommended by the Manufacturer.
•
The carrying vehicle to which the machine will be hitched must be technically
reliable and must fulfil the requirements specified by the machine Manufacturer.
•
Be especially careful when hitching the machine.
•
When hitching, there must be nobody between the machine and the carrying
vehicle.
•
The machine disconnected from the carrying vehicle must be supported on the
snow plough blade and slides or wheels (depending on the machine's equipment)
and placed on level, sufficiently hard surface in such a manner as to ensure that it
is possible to connect it again. The mouldboards should be folded to the rear.
2.1.3 HYDRAULIC SYSTEM
•
The hydraulic system is under high pressure when operating.
•
Regularly check the technical condition of the connections and the hydraulic
conduits. There must be no oil leaks.
•
In the event of the hydraulic system malfunction, discontinue using the machine
until the malfunction is corrected.
•
When connecting the hydraulic conduits to the carrying vehicle, make sure that
the hydraulic systems of the carrying vehicle and the plough are not pressurised.
If necessary, reduce residual pressure in the system.
•
In the event of injuries being caused by pressurised hydraulic oil, contact a doctor
immediately. Hydraulic oil may penetrate the skin and cause infections. In the
event of contact of oil with eyes, rinse eyes with a large quantity of water and in
the event of the occurrence of irritation consult a doctor. In the event of contact of
oil with skin wash the area of contact with water and soap. Do NOT apply organic
solvents (petrol, kerosene).