PRONAR PT610, Operator'S Manual, Page: 81 / 131

SECTION 4 Pronar PT608
4.19
Tipping pins and individual sockets are designed so it is impossible to
place them on the opposite diagonal side of the load box, which would
damage the trailer,
FIGURE 4.2 Bolting of tipping pins
(1) tipping pin, rear left or front right, (2) tipping pin, rear right or front left, (3) locking cotter
pin
open appropriate closures of sides and/or extensions and side wall or rear wall
locks or open rear chute sliding gate (depending on the direction in which
unloading should take place);
During opening exercise caution, because the load may exert great
pressure on the sides.
When you open wall locks do NOT stand within the reach of the wall
and the unloaded materials.
Place the control lever controlling the hydraulic tipping system circuits in
position 1 -- tipping of the first trailer,
initiate tipping of the load box using the selective control valve lever in the
operator's cabin,