PRONAR PT610, Operator'S Manual

Page: 37 / 131

SECTION 2 Pronar PT610
2.11
•
In the event of any fault or damage, do not use the trailer until the fault has been
fixed.
•
While performing maintenance work, use proper, close-fitting protective clothing,
gloves, protective shoes, protective goggles and appropriate tools.
•
Any modification to the trailer frees the manufacturer from any responsibility for
damage or detriment to health, which may arise as a result.
•
The trailer can only be stood on when it is absolutely motionless and the tractor
engine is switched off. Tractor and trailer should be immobilized with parking
brake and chocks should be placed under the trailer wheels. Ensure that
unauthorised persons do not have access to the tractor cab.
•
Service inspections of the trailer should be carried out according to the frequency
specified in this Operator's Manual.
•
Regularly check the condition of nut and bolt connections, in particular
connections of drawbar eye with drawbar and wheel nuts.
•
Before beginning work, which requires raising load box, it must be emptied. Load
box should be tipped to the rear and secured against accidental dropping with the
aid of load box support. The trailer must at this time be hitched to the tractor and
secured with chocks and parking brake.
•
Before beginning repair works on hydraulic or pneumatic systems reduce oil or air
pressure completely.
•
Servicing and repair work should be carried out in line with the general principles
of workplace health and safety. In the event of injury, the wound must be
immediately cleaned and disinfected. In the event of more serious injuries, seek a
doctor's advice.
•
Repair, maintenance and cleaning work should be carried out with the tractor
engine turned off and the ignition key removed. Tractor and trailer should be
immobilized with parking brake and chocks should be placed under the trailer
wheels. Ensure that unauthorised persons do not have access to the tractor cab.