PRONAR PT610, Operator'S Manual, Page: 51 / 131

SECTION 3 Pronar PT610
3.7
FIGURE 3.3 Rear wall
(1) valves, (2) chute (3) lever, (4) locking bolt (5) rear wall closing lever
In order to enable very precise unloading of loose materials there is a slide opening placed in
the rear side (1) – figure (3.3), which is raised using lever (3). When in upper position and
also during transport the slide must be secured by tightening the locking screw (4). A chute
for the trailer may be supplied as additional equipment (2).
3.2.3 MAIN BRAKE
The trailer is equipped with one of four types of main brake:
•
double conduit pneumatic brake system with an automatic regulator, figure (3.4),
•
double conduit pneumatic brake system with a manual three position regulator,
figure (3.5),
•
single conduit pneumatic system with a manual three position regulator, figure
(3.6).