1.
To report stroke feedback on the
metering pumps – such as gamma and
delta
®
, plug the cable from the flow
meter on the pump into the "dosing
monitor" terminal.
ð
The identifier for the dosing monitor
must appear on the LCD screen of
the pump.
2.
If it does not appear, make the neces‐
sary settings at the metering pump.
7.3.2.2 Counter output as fre‐
quency output
Counter output as frequency output
The counter output as frequency output can be
used to signal flow or an error, provided it is set
accordingly - see chapter "Settings".
1.
Remove the connected socket.
2.
Remove the insulation of the leads to
match the terminals of your monitor.
3.
Crimp on a suitable cable end sleeve.
4.
Connect the cable to the monitor in
accordance with the following connec‐
tion information and the operating
instructions supplied with the monitor:
Assembly and Installation
19