ProMinent delta, Supplementary Instructions Manual

Page: 21 / 111

Pr o Minent ®
21
Troubleshooting
Flash code CANopen LED, bottom
Colour Flash code Cause Remedy
red illuminated Controller is BUSOFF Contact customer service
red flashing* RPDO error Contact customer service
red double Error status ERROR- Contact customer service
flashing*** WARNING
red triple Error status ERROR- Contact customer service
flashing WARNING
green illuminated Bus status OPERATIONAL - (standard operation bus)
green flashing* Bus status PRE-OPERATIONAL wait briefly or start pump
via bus
green simple Bus status STARTUP wait briefly or set pump
flashing** active for bus operation
(see Chap. 7, “Settings”)
green pulsating Bus status INIT wait briefly
* ** ***
Ignore the flash codes for approx. 2min. (acknowledge alarm, if any) after connecting the metering
pump.
Table: Flash codes CANopen LED
NOTE
For “error messages through CANopen telegramme” see end of the annex!
Accessories
Accessories Order no.
T-distributor, M12, 5P, CAN 1022155
Load resistor M 12 coupling 1022154
Load resistor M 12 connector 1022592
Connecting cable - CAN, M12, 5P, 1 m 1022139
Connecting cable - CAN, M12, 5P, 2 m 1022140
Connecting cable - CAN, M12, 5P, 5 m 1022141
Connecting cable - CAN, by the meter 1022160
Connecting cable CAN, M 12, 5P, screw terminal 1022157
Connector CAN, M 12, 5P, screw terminal 1022156