background image

3

This telephone is not designed for making emergency telephone calls when the
power fails. Make alternative arrangements for access to emergency services.

SAFETY INFORMATION

1. Please read all the instructions of this manual before using this product.
2. Observe all the instructions marked on this product.
3. Install this product on a stable surface and to avoid anyone from stepping

over the telephone line.

4. Do not fix the AC power supply cord to building surfaces with metal fittings.
5. This product should be operated only from the type of power source

indicated on the product. If you are not sure of the type of power supply to
your home, consult your local power company.

6. Do not use this product near water, or when your hands are wet. If the

product comes into contact with any liquids, disconnect the power supply
immediately and contact repair centre.

7. To prevent fire or electrical shock hazard, do not expose this product to rain

or moisture.

8.  Before cleaning the product, disconnect it from the telephone jack and

power source. Use a soft, damp cloth to clean the product. Do not use liquid
cleaner, aerosol cleaners or abrasive powder to clean this product.

9. As there maybe electric shock from lightning, avoid using or installing this

product during thunderstorms.

10. If the product is not operating normally or if it is damaged, do not open the

cabinet or try to repair by yourself. This will void your warranty and also
expose you to dangerous electrical shock or other risks. Please contact
repair centre.

11. Do not use any metallic objects to connect the charging terminals on the

Base Station as this may cause fire due to overloading the power source.

12. Do not charge the battery by any devices other than that provided by this

product.

13. Never use ordinary (non-rechargeable) batteries. Only use approved

batteries of the same type (rechargeable), otherwise battery damage can
result.

14. Dispose the damaged battery properly.
15. Do not touch the uninsulated telephone wires or terminals unless the

telephone line and power source has been disconnected.

16. Do not overload wall outlets and extension cords as this can lead to

electrical shock.

17. Medical equipment can be affected by the handset.

Summary of Contents for PDX-1700 Series





























Reviews: