Profoon PDX-1700 Series, User Manual

Page: 26 / 28

PIN-CODE RESET
In case you forgot your PIN-code, than act as follow:
1. Press and hold the button on the base for about 6 seconds until the In-use
LED starts to flash, than release this button.
2. Press again this button for about 6 seconds until the In-use LED starts
flashing rapidly, than release this button.
3. Now press this button momentarily, now the PIN-code is returned to 0000.
Attention: with this reset procedure, all extra handsets are now de-registered.
You may have to register them again as decribed on page 23.
MAINTENANCE
· Do not clean any part of your telephone with benzene, thinner or other solvent
chemicals - this may cause permanent damage that is not covered by the
guarantee. When necessary, clean it with a damp cloth.
· Keep your telephone away from hot, humid conditions or strong sunlight.
· Every effort has been made to ensure the highest standards of reliability for
your PDX-1700 series DECT telephone. However, if something does go
wrong, please do not try to repair it yourself - consult your supplier.
· Do not use your telephone outdoors in the rain, or handle it with wet hands -
water can damage electrical equipment.
· Exhausted batteries may never be disposed of in household waste but
must be handed in at your local depot for chemical waste.
TECHNICAL SPECIFICATIONS
Standard DECT (Digital Enhanced Cordless
TeleCommunications )
Frequency range 1.88 to 1.9 GHz (bandwidth = 20 MHz)
Channel bandwidth 1.728 MHz
Modulation GMSK
Speech encoding Adaptive Differential Pulse Code Modulation
(ADPCM) at 32 kbit/s
Communication range Up to 300m in open space
Up to 50 m in buildings
Handset power supply rechargeable batterypack, 3x AAA, NiMH,
3.6V 700mAh
Operating time Standby: > 100 hours
Talking: > 6 hours
Operating temperature 0°C to 40°C
Storage temperature -20°C to 60°C
26