Maintenance
last update: 30.07.2014
page 63
15.3
Charging
To charge the battery, plug in the charger plug on the
and connect the charger to a wall socket
(100 - 240 V, 50 - 60 Hz).
The special plug on the battery cable has a reverse
polarity protection. The
or on while charging.
The battery charger may be connected to the
also after finishing the charging cycle as
long as it is still connected to a wall socket. For
disconnecting the charger press
the “push button” on
the port for battery charger.
15.3.1 Charging status indication / charging cycle
The charge indicator light on the charger shows the charge of the battery in the charging cycle:
•
Is the indicator light red, the unit is fast charging. The battery charger is in constant
current mode and the charge current is maximum.
•
Is the indicator light orange,
the charging cycle “final charge” is active. The battery is
normally approx. 80% charged when the LED-indicator changes to orange. The battery
charger is in constant voltage mode.
•
Is the indicator light green, the battery is fully loaded.
Always charge the battery with the charger supplied!
If possible, the battery should always be charged completely which is shown with the
green charging status indication light.
The battery may only be replaced by Proceq or by an authorized Proceq-agent!
during several months, the battery should be
charged before using.
