Proceq Zehntner ZRM 6013+, Instruction Manual

Page: 59 / 76

version 1.1
ZRM 6013+
Instruction manual Menu
last update: 30.07.2014 page 59
At both lists you are able to have the following
information:
Location, Street, Position, Section, Direction, Line,
Type, Remarks, Producer, Product, Manufacture-no,
Certificate, Glass beads, Type, Mixture, Batch no,
Supplier, Product, Type, Batch no
14.6.9 Calibration
Path: -> and selecting
“Setup”
In this menu you can set some general calibration
settings.
The ZRM 6013+ will remind you after the calibration
interval that the calibration of the instrument is due.
By pressing and
and selecting “Setup” and
“Calibration” you are able to set the calibration interval
between 1 day and 49 days.
The current calibration interval is shown by a green
tick .
By pressing and
and selecting “Setup” and
“Calibration” you can either show the deviation of the
2
nd
standard or leave it hidden. The current setting is
shown by a green tick .
14.6.10 Units
Path: -> and selecting
“Setup”
By pressing and
and selecting “Setup” and
“Units” you are able to choose the units of
temperature and the unit of length.
The current unit of temperature is indicated by .