Archive
page 42
last update: 30.07.2014
12.4
Input of additional information
Further below this list, you can add or change
additional information to the measurement entry such
as Location, Street and so on.
For changing the Location, press this line and
afterwards the
icon „Edit“ for opening the edit window.
“&” appears. Alternatively you can press the
for getting the number keyboard or the
for getting the special signs keyboard.
12.5
Printing of a measuring report
By pressing the symbol
you are opening the
window for selecting a printer. Here you can either
choose the optional built-in thermal printer or an
external printer connected to the USB-interface. By
pressing the desired printer the measuring report will
be printed out.
For choosing the information to be printed on the
measuring report, please refer to chapter 14.6.8
”Printer” on page 58.
12.6
Storing the measuring data on a USB flash drive
Connect a USB-stick on the USB-interface (host). By
pressing the button
all measuring entries will be
stored on the USB-stick. The message beside will be
shown during copying. The exported measurements
can be opened on a computer/laptop using the
mapping software “MappingTools”. The Use of
MappingTools is described in the separate instruction
manual.
