Proceq Zehntner ZRM 6013+, Instruction Manual

Page: 48 / 76

Menu
ZRM 6013+
Instruction manual version 1.1
page 48 last update: 30.07.2014
14.3.2 Auto save measurements
Path: -> and selecting
“Measure mode”
The default settings are set that every measurement is
stored in the archive (memory).
14.3.3 Average
Path: -> and selecting
“Measure mode”
Here you can activate average readings.
A faster way would be to press on the touchscreen the
symbol . If the symbol is shown, the average
reading is activated.
14.4
Timers
14.4.1 Wet timer
Path: ->
and selecting “Timers”
The ZRM 6013+ is equipped with a wet timer so that
the measurement will be taken right after the desired
time after the road marking has been moistened. Here
you can activate the wet timer.
A faster way would be to press on the touchscreen the
symbol . If the symbol is shown, the wet timer
is activated.
If the wet timer is activated, you can see the current
setting for the wet timer time and wet timer mode. For
changing these settings, you need to press on the
respective line.