Menu
last update: 30.07.2014
page 47
14.2
Navigation in the menu
where you can set different settings. Activate,
deactivate, scroll and exit the menu as described in
chapter 7
“Navigation” on page 16. On the top of each
window you can read in which menu you are.
14.3
Measure mode
and selecting “Measure mode” you are able to change the measurement
settings.
14.3.1 Geometries
Path:
->
and selecting
“Measure mode”
The default settin
g is “R
L
+ Qd”. We recommend
choosing this setting so you will always have the
complete information.
If you decide to choose e.g. R
L
for faster single
measurements you need to remember to change back
to the setting “R
L
+
Qd” as soon as you need also the
Qd values.
