Proceq Zehntner ZRM 6013+, Instruction Manual

Page: 28 / 76

Operate
ZRM 6013+
Instruction manual version 1.1
page 28 last update: 30.07.2014
10. Quickstart menu
By pressing the button you get to the quickstart
menu.
10.1
Menu
Press the button and to get into the menu where you can set different settings. The
menu is explained in chapter 14
„Menu“ as from page 46.
10.2
Navi
This is an option at extra cost. Therefore this icon will
only be shown if the WAAS GPS-unit has been
purchased.
Press the button and so that you get some
information about the current positioning of
ZRM 6013+ . Further information is available in
chapter 11.1
“WAAS GPS-unit” as from page 30.
10.3
Archive
All stored files are located in the archive. By and you open the archive (memory).
There you are able to edit, delete, export to USB flash drive as well as to print out. For further
information please refer to chapter 12
„Archive“ as from page 40.
10.4
Print
By pressing the button and you have the
possibility to print out either the last measurement or a
specific measurement earlier marked in the measure
mode display using the optional built-in thermal printer
or an USB-printer such as our optional portable
printer. Without marking the last measurement will be
printed. The default setting which information is
included in the measuring report can be changed in
the menu as described in chapter 14.6.8
“Printer” on
page 58.