Archive
last update: 30.07.2014
page 41
12.2
Overview measurements (sorted)
In the first column you see the R
L
-values and in the
second column the Qd-values. In the third column
there are listed the date, time, the number of single
measurements e.g. (5) at average measurements as
well as the job. Press on a desired line for getting
some additional information to the entry.
You get a list of all measurements stored under the
job
“Default” if you have chosen at the sorting of
measuremen
ts “by job” and afterwards the job
“Default”. If you press in this selection the button
“Delete all in list” then every single measurement
stored under
the job “Default” will be deleted at once.
It is recommended carrying out a back-up copy on
your PC/laptop or on a USB-flash drive.
Here you are able to delete this single entry or
opening the quick entry information by pressing the
button “More”.
12.3
Detailed entry information
At a measurement entry you will find firstly the
measuring values, the date/time and on which
standard the instrument has been calibrated for this
measurement or series of measurement respectively.
Furthermore, you have different additional information
such as temperature and humidity. If the instrument is
equipped with the optional GPS, the GPS coordinates
will be shown as well.
“On Standard: True” means that the measurement has
been made on the calibration standard. Such a
measurement must not be used for the evaluation of a
road marking.
