probst POWERPLAN PP, Operating Instructions Manual, Page: 69 / 230

Operating Instructions
PP Maintenance and care
68 / 73
V4 GB
6.5.9 Changing light bulbs
Risk of personal injury and damage to property
Light bulbs and lamp holders become hot when the lights are switched on. They can cause burns
if touched and can ignite flammable objects.
•
Keep at a minimum distance of 500 mm from flammable objects.
•
Turn off the lights in plenty of time before changing light bulbs.
•
Allow lamps to sufficiently cool before changing light bulbs.
Risk of damage to property
Failure to change light bulbs properly can lead to short circuits.
•
Allow lamps to sufficiently cool before changing light bulbs.
•
Do not touch the glass bulbs of the lamps with bare hands. Even minor particles can burn into
the light bulbs and reduce their service life.
•
Only touch light bulbs with a clean, dry and lint-free cloth.
•
Observe the light bulb’s type, volts and Watts.
Light bulbs H3, 55 W, 12 V DC
The procedure described below applies
both to changing the headlights’ and
working headlights’ light bulbs.
1. Open the housing cover (1) by turning
it.
2. Press together the clamp and remove
it.
3. Remove the cable (3) from the
connector (4).
4. Remove the light bulb holder with
the defective light bulb (5) and
remove the defective light bulb.
5. Fit the new light bulb in reverse
order.