probst POWERPLAN PP, Operating Instructions Manual, Page: 36 / 230

Operating Instructions
PP Operating the machine
35 / 73
V4 GB
5.3.3 Checking the hydraulic fluid level
1. Park the machine on level ground.
2. Open the engine hood. See “Opening
the engine hood”.
3. Check the hydraulic fluid level at the
fluid level indicator (1).

Fluid level in the middle: Ideal
fluid level.

Fluid level right at the bottom or
no longer visible: The tank is nearly
empty. Top up the hydraulic fluid
immediately.

Fluid level right at the top:
Hydraulic fluid level is too high.
Contact customer services.
If the hydraulic fluid needs to be
topped up:
4. Unscrew the cap (2) and top up with
hydraulic fluid through the filler pipe.
See
“Technical data” for information
on operating fluids and filling
capacities.
5. Close the engine hood
5.3.4 Checking the coolant level
Risk of personal injury
The engine cooling system is pressurized. Coolant can be hot and cause serious burns.
•
Only unscrew the cap once the engine has cooled down. When doing so, the coolant
temperature indicator must be below +40 °C.
Risk of damage to property
Failure to mix the anti-corrosion agent, anti-freeze and water at the correct ratios can lead to
damage.
•
To avoid damage, observe the information on the mixing ratios for the anti-corrosion agent,
antifreeze and water. Please refer to the separate operating manual for the combined cooler
(EMMEGI) for more information.
Risk of damage to property
Failure to use the correct anti-corrosion agent and anti-freeze can lead to damage.
•
To protect the machine from corrosion, the cooling system must be kept filled with a coolant
mixture throughout the entire year (both in summer and winter).
•
Only use the specified anti-corrosion agents and antifreeze. See the separate operating
manual for the combination cooler (EMMEGI) for more information.