manualshive.com logo in svg

Printronix S828, Programmer'S Manual

The Printronix S828 Programmer's Manual is a comprehensive guide to maximize the functionality of your device. Easily download the manual for free from our website to enhance your printing experience. This user-friendly guide provides detailed instructions on how to optimize the performance of your Printronix S828.

Share
Download
background image

Programmer

 

Manual

 

 

PTX

‐

S828

 

Chapter

 

6

 

IPDS

 

Exception

 

Reporting

 

Codes

 

222

 

260071

‐

001A

 

X'021101' Invalid Baseline Increment  
Explanation:

 The value of the baseline increment is 

not a valid or supported value.  

Alternate Exception Action:

 None.  

 

 

X'021201' Invalid Intercharacter Adjustment  
Explanation:  

1. The value of the intercharacter adjustment is 
not a valid or supported value.  
2. The intercharacter adjustment direction is not 
a valid or supported value.  

Alternate Exception Action

:  

1. Ignore the control sequence and continue  
presentation with the parameter values 
according to the hierarchy (the hierarchy is the 
last valid value received or if none received then 
use the LPD value).  
2. Use direction = zero. 

Note

: In an LPD command, no Alternate 

Exception Action occurs.  
 

X'021202' Font Storage is Full  
Explanation:

 There is insufficient pattern storage to 

store the font transmitted with the Load Symbol Set  
command. There is insufficient storage to load the 
data transmitted with the Load Font Equivalence 
command.  

Alternate Exception Action:

 None.  

 

 

X'021301' Invalid Absolute Move Baseline 

Value  
Explanation:

 The Absolute Move Baseline 

parameter value is not a valid or supported 
value.  

Alternate Exception Action:

 None.  

 

X'021401' Invalid Absolute Move Inline Value  
Explanation:

 The Absolute Move Inline parameter  

value is not a valid or supported value.  

Alternate Exception Action:

 None.  

 

 

X'021402' Font to be Deleted Not Found  
Explanation:

 The single byte font specified by 

the Deactivate Font command is not in the 
machine.  

Alternate Exception Action: 

None.  

X'021403'  
Explanation:

 Unsupported Baseline Move  

Alternate Exception Action:

 None.  

 

 

X'021502' Invalid DF Font  
Explanation:

 The Loaded Font Identifier field is  

required in the Deactivate Font command; 
however, it is not present or its value is not a 
valid or supported value.  

Alternate Exception Action:

 None.  

 

X'021802' Invalid Font ID  
Explanation:  

1. The two-byte Font Identifier on a Load Symbol 
Set or Load Font Equivalence command is not a 
valid or supported value.  
2. The one-byte Font Identifier value on the Load 
Font Equivalence command is not a valid or 
supported value.  
3. A font is referenced on a Set Font control, a 
Logical Page Description, a Load Symbol Set, a 
Write Graphics, or Write Bar Code command, but 
the font has not been previously identified by the 
Load Font Equivalence command.  
4. The font or symbol set referenced in a Logical 
Page Description, Write Text, or Write Graphics 
command is defined within the current Load Font 
Equivalence but is not loaded in the printer.  

Alternate Exception Action

:  

1. None.  
2. None.  
3. Substitute the active font for the specified local 
font and continue processing.  
4. Substitute the active coded font for the specified  
local font and continue processing. 

 

X'021701' Invalid Variable Space Increment  
Explanation:

 The value of the variable space  

increment as specified in a text control is not a 
valid or supported value.  

Alternate Exception Action

: None.  

 

 

Summary of Contents for S828









































































































































































































































































































































































































































Reviews:

No comments

Related manuals for S828

Canon iPF650 - imagePROGRAF Color Inkjet Printer Basic Manual preview
iPF650 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 40
Canon iP90 - PIXMA Color Inkjet Printer Easy Setup Instructions preview
iP90 - PIXMA Color Inkjet Printer
Brand: Canon Pages: 2
Canon iPF650 - imagePROGRAF Color Inkjet Printer Install Manual preview
iPF650 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 16
Canon iP100 - PIXMA Color Inkjet Printer Setup Instructions preview
iP100 - PIXMA Color Inkjet Printer
Brand: Canon Pages: 2
Canon imageRUNNER ADVANCE C5560 Configuration And Installation Manual preview
imageRUNNER ADVANCE C5560
Brand: Canon Pages: 67
Canon imageRUNNER 3300 Reference Manual preview
imageRUNNER 3300
Brand: Canon Pages: 366
Canon IMAGERUNNER ADVANCE C5051 Getting Started preview
IMAGERUNNER ADVANCE C5051
Brand: Canon Pages: 252
Canon iPF710 - imagePROGRAF Color Inkjet Printer Operations preview
iPF710 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 2
Datamax ST-3210 Programmer'S Manual preview
ST-3210
Brand: Datamax Pages: 26
Samsung CLP-600 Series User Manual preview
CLP-600 Series
Brand: Samsung Pages: 115
Pantum M9106 Series User Manual preview
M9106 Series
Brand: Pantum Pages: 164
DNP CX-120 Service Manual preview
CX-120
Brand: DNP Pages: 66
Oki MPS730b Manual De L'Utilisateur preview
MPS730b
Brand: Oki Pages: 143
TEC B-470-QQ Series Owner'S Manual preview
B-470-QQ Series
Brand: TEC Pages: 32
Oki OkiPos 407II Installation Manual preview
OkiPos 407II
Brand: Oki Pages: 8
Lexmark 5470 - X Color Inkjet User Manual preview
5470 - X Color Inkjet
Brand: Lexmark Pages: 202
NEC 4650NX - SuperScript Color Laser Printer Network Manual preview
4650NX - SuperScript Color Laser Printer
Brand: NEC Pages: 74
OKIDATA OL830 Service Manual preview
OL830
Brand: OKIDATA Pages: 158

Brands by name

Popular brands

Load more brands