Programmer
Manual
PTX
‐
S828
Appendix
B
‐
Interfaces
370
260071
‐
001A
Serial Interface Signals
The following table lists the RS-232/C serial interface signals:
Local
Remote
Connect.
Connect.
Signal Name Pin Number
Source
Source
Description
SIGNAL
5
–
–
Always connected to the 0 Volts of the
GROUND
Power
Supply
TXD
3
Printer
Printer
Transmitted Data Signal (an output from
printer). A MARK condition is held during
IDLE communication state. An indeterminate
state is present when printer is powered off.
RXD
2
Host
Data Set
Received data signal (an input to printer).
RTS
7
Printer
Printer
Request to Send Signal (an output from
printer). Active HIGH level signal. It is HIGH
until the printer is powered off, then an
indeterminate state is present .
CTS
8
Data Set
Active HIGH level signal indicates that the
host or data set is ready to receive data from
the printer.
DSR
6
Data Set
Active HIGH level signal. Indicates that the
host or data set is ready to be connected to
the printer and is ready for data transfer.
DCD
1
Data Set
Active HIGH level signal. Indicates that the
host
is
transmitting
or
the
data
set
is
r
receiving
the
Data
Carrier
signal.
2nd RTS
9
Printer
Functionally equivalent to the DTR signal.
DTR
4
Printer
Printer
Data Terminal Ready. Normally HIGH (ON).
Indicates that the printer is ready to initiate a
connection.
LAN Interface Port
LAN Interface Port
1. Ethernet 10/100BaseT Connector
2. Green 10/100Mbit/sec. Transmission Speed LED
3. Yellow Traffic LED
LED Indicators
The LED indicator modes are described in the following table:
LED
Status
Description
Yellow LED
Unlit
Transmission speed at 10Mbit/sec.
Lit
Transmission speed at 100Mbit/sec.
Green LED
Blinks
Transmitting or receiving packets from the network.
USB Interface Port
USB 2.0 full speed 12/Mbit/sec. interface.
Summary of Contents for S828
