Printronix S828, Programmer'S Manual

Page: 142 / 424

Programmer Manual PTX ‐ S828
Chapter 5 IPDS Programming Information 140 260071 ‐ 001A
Decimal Hex Value Description
19-20 13-14 F0F1 Plant of Manufacture
21-32 15-20 XX...XX Sequence Number
33-34 21-22 0000 Tag
35-43 23-2B XX...XX EC Level
44-59 2C-3B XX...XX Device Specific
If the printer is in 4224 emulation mode:
Decimal Hex Value Description
0-1 0-1 003F Length
2-3 2-3 0013 Product Identifier
4 4 03 Length of this Field
5-6 5-6 0000 4224 with Page Counter Fix ID
7 7 38 Length of this Field
8-9 8-9 0001 4224 Product Identifier Parameter ID
10-15 A-F F0F0F4F2F4F7 Device Type
16-18 10-12 E5F0F3 Model Number
19-21 13-15 C9C2D4 Manufacturer
22-23 16-17 F0F1 Plant of Manufacture
24-35 18-23 XX...XX Sequence Number
36-37 24-25 0000 Tag
38-46 26-2E XX...XX EC Level
47-62 2F-3E XX...XX Device Specific
Execute Order Any State (XOA)
Length D633 Flag Correlation ID (Optional) Data
Subcommand Subcommand Data
The Execute Order Any State command identifies a set of subcommands (orders) that take effect
immediately, regardless of the current printer command state. This command is valid in any state.
Each data field contains a two byte order (subcommand), followed by a zero or more bytes of parameters
for that order. There is only one subcommand for a single XOA command.
The valid orders for the XOA command are:
Order Description
1000 Activate Printer Alarm (APA)
F200 Discard Buffered Data (DBD)
F400 Request Resource List (RRL)
F600 Exception Handling Control (EHC)