Printronix Network Interface Card, User Manual

Page: 146 / 378

Chapter 5
SCO Setup
146
Troubleshooting
This installation procedure assumes that the NIC adapter is
configured with the correct IP address, subnet mask, and gateway
(if required). In addition you can also ping and telnet to the NIC
adapter.
To verify the NIC settings, print an E-net Test Page by doing the
following:
•
(P5000, T5000e/SL5000e) DIAGNOSTICS Printer
Tests E-Net Test Page Enter .
•
(P7000, T5000r/SL5000r) DIAGNOSTICS Printer Tests
Ethernet Test Enter .
•
(L55xx, L1524) DIAGNOSTICS Test Pattern E-Net Test
Page Enter .
The default NIC queue name is d1prn (in lower case), however the
name can be changed. To verify the queue name, print an E-Net
Test Page or telnet to the adapter and do a “list dest” command.
AIX Remote Queue Time–Out Setting
Symptoms: Print jobs restart or queue goes down.
If the queue is set up for standard processing (not local filtering),
add -T50 flag to rembak to the queue device stanza for the queue
in /etc/qconfig
backend = /usr/lib/lpd/rembak -T50
If the queue was set up for local filtering edit the file
/usr/lib/lpd/pio/etc/piorlfb and change the line;
typeset piorlfb_rbflags=’’’’
to
typeset priorlfb_rbflags=”-T50”