Printronix Network Interface Card, User Manual

Page: 162 / 378

Chapter 6
Novell Host Configuration
162
16. Assign a name (if not an existing printer) to this printer.
17. Select Remote Other/Unknown at the Type field.
18. Click Escape to save the changes.
19. Click Escape until you are back at the Print Server
Configuration menu.
20. Select Queues Serviced by Printer to display a list of defined
printers.
21. Select the printer you just defined and press ENTER.
22. At the list of queues that displays, click Insert to add a queue to
the list.
23. Select the queue defined and press ENTER.
24. When prompted for a priority, press ENTER to select the
default or select a priority.
25. Click Escape until you have exited PCONSOLE.
26. Reload the PSERVER.NLM that the NIC is to service as an
RPRINTER.
27. Repower the NIC by turning the printer off and then back on.
28. Wait two minutes and then check your PSERVER to see if the
appropriate printer is being serviced. The PSERVER should
indicate that the printer is “Waiting for job.”
At this point, the NIC knows to receive any jobs this
PSERVER.NLM has to send to it through the defined printer.