Printronix Network Interface Card, User Manual, Page: 238 / 378

Chapter 10
Configuring The AS/400 For Printing
238
3. Enter values for the following parameters:
Output Queue (OUTQ)
The name of the AS/400 output queue. The name can be
anything you would like. This name is not the same as the
printer internal queue name,
‘d1prn’
.
Remote System (RMTSYS)
Internet address of the NIC on the printer (
*INTNETADR
prompts you for this) or the hostname of the NIC.
Remote Printer Queue (RMTPRTQ)
Default name of the network printer. Set for any of
‘d1prn’
through
‘d8prn’
. The remote printer queue name must be
lowercase, entered in single quotes.
NOTE: When the IPDS feature is installed, queue name
‘d4prn’
is not available.
Writer to Autostart (AUTOSRTWTR)
Set the value to
1
. This will start the Remote Writer when the
queue is created, and it automatically starts the Remote Writer
after each IPL of the AS/400 and whenever STRTCP is started.
Connection Type (CNNTYPE)
Specify this value as
*IP
.
Destination Type (DESTTYP)
Specify
*OTHER . *OTHER
is a performance enhancement, in
which data is not required to be transformed again if the
connection is interrupted and allows printing of multiple copies.
Transform (TRANSFORM)
Specify this value as
*YES
.