Printronix Network Interface Card, User Manual

Page: 307 / 378

Store Commands
307
Complete Command List
This section outlines the entire NIC command set including the
command syntax, a description, and in most cases, an example for
each command listed.
NOTE: If you see the word
ifnum
in any npsh commands, you
should substitute a
1
or
2
unless told otherwise. The
1
represents the one network interface (e.g., Ethernet)
supported. The
2
represents the wireless network interface
if it exists in the system.
Store Commands
These commands change the settings stored in flash memory and
do not affect the current or working settings in memory. A power