Printronix Network Interface Card, User Manual, Page: 95 / 378

Configuration Using ARP
95
3. Use the
arp
command to add an entry into the Windows
station ARP table for the NIC. This is the most common syntax
for this command:
Syntax:
arp -s ipaddress ethernetaddress
Example for Microsoft
®
TCP stacks:
arp -s 192.75.11.9 00-80-72-07-00-60
This example specifies a NIC using IP address
192.75.11.9
and Ethernet address
00-80-72-07-00-60
.
4. Check if the ARP entry was accepted.
arp -a
You should see an entry in the listed ARP table with the IP
address and Ethernet address specified in Step 3.
5.
Ping
this IP address to see if the NIC can be seen on your
network.
At this point, you should be able to communicate with the NIC