Printronix Network Interface Card, User Manual, Page: 353 / 378

Printer Logging Through Logpaths
353
7. Using Windows Explorer, navigate to the appropriate file on the
CD (using the Unzipped directory) based on the printer type,
and desired emulation, e.g., Unzipped
T5000 IGP.
(See Figure 42.)
IMPORTANT
You must use the Unzipped directory, since this contains the
uncompressed files necessary for NIC download.
8. Make note of the file name, which is a six digit number plus
.prg , e.g., 123456.prg.
This is the file you will download into the NIC.
9. Copy the file to the download directory.
10. Start a command prompt session. (The Start Menu icon is
usually labeled
MS-DOS Prompt or Command Prompt.)
11. At the command prompt type:
C:
<Enter>
cd \download
<Enter>
12. Start the FTP protocol by typing:
ftp xxx.xxx.xxx.xxx
<Enter>
(where xxx.xxx.xxx.xxx represents the IP Address of the
printer.)
13. Log in to the printer by typing:
root
<Enter>
You are given a password prompt.
NOTE: The default is no password. If the FTP program requires a
password, contact your system administrator.
14. At the password prompt, press <Enter>.
15. Once logged in, type the following sequence at the command
prompt to download the filename .prg file to the printer:
cd dest
<Enter>
cd d1prn
<Enter>
bin
<Enter>
put filename .prg
<Enter>
(where filename .prg is the file name you noted in step 8.)
Downloading Software Through The Network Interface Card (NIC)