Printronix Network Interface Card, User Manual

Page: 23 / 378

Models
23
Interfaces
The NIC interfaces with your printer through an Ethernet
10/100Base-T interface connector.
Two NIC interfaces are available, depending on the type of
controller board the printer contains. Some printers use NICs with
dip switches and LEDs. Other printers use NICs that plug into the
Peripheral Component Interface (PCI) controller boards that have
no dip switches or LEDs.
NOTE: If both cards are present, you will see two sets of front
panel options under network parameter, E-Net Adapter and
Ethernet. The two NICs are two separate interfaces and
are networked. You can autoswitch between the two.
If your NIC does not have dip switches or LEDs refer to
“Speed Setting for 10/100Base-T” on page 29.
Interfaces