Printronix Integrated Network Interface Card User Manual Download Page 67

Page: 67 / 310

Current Model Settings

Logpath Port

Define where logging information for print jobs passing through the
associated destination will be reported. The choices are:

•

prn

- reported to the PRN port

•

none

- don't report any logging information

•

TCP/IP port

- to a TCP port number (specified in the edit field)

•

syslog

- to a host (specified by the IP address in the edit field)

running a SYSLOG daemon

•

email

- to an e-mail address (specified by the e-mail address

and the SMTP server IP address edit fields). You can set the
option on the Administration web page.

Default:

no logging turned on.

LogPath Configuration

Summary of Contents for Integrated Network Interface Card























































































































































































































































































































Search results

Summary of Contents for Integrated Network Interface Card

Reviews:

Related manuals for Integrated Network Interface Card

Brands by name

Popular brands

Printronix Integrated Network Interface Card, User Manual

Search results

Summary of Contents for Integrated Network Interface Card

Reviews:

Related manuals for Integrated Network Interface Card

Brands by name

Popular brands