Printronix Integrated Network Interface Card, User Manual

Page: 122 / 310

Chapter 5
Solaris 2.6 – 7 NIC Setup
118
Manual LPR/LPD Host Setup
The NIC also supports Unix operating systems which follow a BSD
print system (e.g., SunOS 4.1.x). This means a printcap file is used
to define all printers available on the host, and interface scripts are
not commonly used. Instead, LPR/LPD printers are defined.
To manually configure an LPR/LPD printer on a BSD Unix system:
1. Define an entry for this new printer within the printcap file, /etc/
printcap.
Syntax:
printername:
:sh:pw#80:mx#0:\
:rm=
NICname :\
:rp= NICdestination :\
:lp=:\
:sd=/usr/spool/lpd/
printername :\
:lf=/usr/spool/lpd/ printername /log:\
:af=/usr/spool/lpd/ printername /acct:
where
printername
is any name you would like to give to this
new printer,
NICname
is the host or IP name of the print
server, and
NICdestination
is one of the pre-defined
destinations/queues on the device.
Example:
P5000:
:sh:pw#80:mx#0:\
:rm=spike:\
:rp=d1prn:\
:lp=:\
:sd=/usr/spool/lpd/ P5000:\
:lf=/usr/spool/lpd/ P5000/log:\
:af=/usr/spool/lpd/ P5000/acct: