Printronix Integrated Network Interface Card, User Manual

Page: 23 / 310

Speed Setting for 10/100Base-T
19
6. NIC in Auto mode in 10mbps HD environment (determined
using 10hd hub)
Use auto-negotiation to the highest common local and remote
capability, i.e. 100HD in this case.
PORs to 10HD. Resets to 10HD. Reconnection at switch
maintains 10HD.
NOTE: With parallel detection, only speed can be determined. The
duplex mode sets to half duplex.
Conventions Used In This Manual
All uppercase print indicates control panel keys.
Example: Press the CLEAR key, then press the ONLINE key.
Quotation marks (“ “) indicate messages on the Liquid Crystal
Display (LCD).
Example: Press the ONLINE key. “OFFLINE” appears on the LCD.
Command syntax and examples are formatted as follows:
•
The Courier font in boldface indicates commands that you
type. For example:
At the prompt, type:
ping ftp.CompanyWebsite.com
•
Regular Courier font indicates references to command syntax
and output. For example:
The
ftp.CompanyWebsite.com
site is working properly.
•
Variable values are shown in italics in command syntax, output,
and in text. For example:
ping ipname
The
ipname
is working properly.
Conventions Used In This Manual